The command in AutoCAD which is used to bevel the edge of an object is known as:

Question

Question

This question was previously asked in

SJVN ET Mechanical 2019 Official Paper

Attempt Online

Answer 1

Explanation:

Chamfer:

In AutoCAD, the Chamfer command is used to create a beveled edge by trimming or extending two intersecting lines or objects to meet at a specified angle or distance. Chamfering involves creating a sloped edge between two surfaces, which is particularly useful in engineering and design to eliminate sharp edges or to prepare parts for assembly.
The Chamfer command allows users to specify two distances (one for each line) or a distance and an angle to create a beveled edge. This command modifies the geometry of the selected lines or objects by trimming or extending them until they meet at the chamfered edge. The result is a clean, sloped transition between the intersecting objects.

Steps to Use the Chamfer Command:

Type CHAMFER in the command line or access it from the Modify panel.
Select the first object or line.
Select the second object or line.
Specify the chamfer distances or use the angle option as prompted.
The selected edges are modified to create the beveled edge as per the specified parameters.

Applications of Chamfer:

Chamfers are widely used in mechanical and architectural design to create smooth transitions and eliminate sharp corners.
In manufacturing, chamfering is essential for preparing parts for assembly, ensuring proper fit, or reducing stress concentrations at corners.

Additional Information

Offset

The Offset command is used to create a parallel copy of an object at a specified distance. This command is beneficial for creating concentric shapes or evenly spaced designs but does not serve the purpose of beveling edges.

Fillet

The Fillet command is used to create a rounded edge, or fillet, between two intersecting lines or objects. While filleting and chamfering share similarities in modifying edges, fillet results in a rounded transition, whereas chamfer produces a beveled or sloped edge.

Stretch

The Stretch command allows users to move or stretch specific parts of an object while keeping other parts fixed. This command is useful for modifying the dimensions of objects but is not related to beveling edges.